Download Table of Contents Print this page

Changing The Default Settings - AEG DVD-R 4518 Operation Manual


Table of Contents

Changing the default settings

Understanding the menu
Using the menu
Overview of the
main menu
05-DVD-R 4518 AEG - GB 68
Changing the default settings
A large number of default settings can be comfortably changed via the
screen menu.
Press the SETUP-button (Fig. 3/13) on the remote control to start the
menu for changing the default settings.
Many of these default settings can be changed via both the remote
control and the menu „System Setup". The difference is: If you
change the default settings via the remote control, these changes
will only be valid until the DVD recorder is switched off or the DVD
is changed.
However, any changes made in the menu „System Setup" are
The Setup menu has two menu levels:
Main menu: The main level is represented by graphical symbols.
Sub-menu: The corresponding sub-menu options can be found
under each of the main menu options.
Navigation and selection
Use the Cursor Buttons (Fig. 3/12, 32) on the remote control to
browse through the main menu.
In contrast to this, you must use the Cursor Buttons (Fig. 3/10,
33) to move in the sub-menu.
Select a menu option with the SELECT button (Fig. 3/11).
Use the SELECT button (Fig. 3/11) also to select an option (e.g.
"Interlace" in the illustration on the left). The selected option (in the
example „Interlace") is now highlighted.
The main menu can only be called up completely if there is no disk
in the drive.
System Setup - General (1)
System Setup - Playback (2)
System Setup - Record (3)
System Setup - Language (4)
System Setup - Channel scan (5)
System Setup - Clock(6)
05.07.2006, 10:31:26 Uhr



Table of Contents

Table of Contents