Table of Contents
Advertisement
Troubleshooting
Before assuming malfunction and contacting your service provider when experiencing
operational problems, be sure to check the following information as well as the
troubleshooting section of the Pocket PC User's Guide first.
Possible Cause
Main battery is weak.
Internal malfunction
Operation is disabled when the AC adapter is connected.
Possible Cause
Main battery is weak.
The unit is not mounted on the cradle
correctly.
Possible Cause
Main battery is not loaded correctly.
The battery replacement procedure was
not followed correctly.
* Perform the procedure on page 41 when the full reset (memory initialize) does not
correct the problem.
Nothing happens when the power button is pressed.
Replacing the main battery caused malfunction.
Recommended Action
Charge the battery pack.
Reset the unit.
If resetting the unit does not correct the
problem, perform a full reset (memory
initialize).*
Recommended Action
Charge the battery pack.
Mount the unit on the cradle correctly.
Recommended Action
Remove and then reload the main
battery.
• Make sure the positive (+) and negative
(–) poles are oriented correctly.
Perform a full reset (memory initialize).*
• If the above action does not solve the
problem, remove the main battery
and contact your original dealer or an
authorized CASIO service provider.
38
Page
33
34
36
Page
33
18
Page
30
36
Advertisement
Table of Contents
