Flash Status Indicators; Precautions When Using Flash - Casio GV-10 Images Manual

Casio gv-10: user guide

Hide thumbs Also See for GV-10:

Table of Contents

Flash Status Indicators

You can find out the current flash unit status by checking the

monitor screen and the operation lamp.

Operation lamp

Monitor screen

Operation Lamp

If the operation lamp is doing this:

Flashing amber

Flashing red

Monitor Screen

is shown on the monitor screen when auto flash is se-

lected.

RECORDING IMAGES

It means this:

Flash unit is charging.

Flash unit cannot charge

for some reason.

• Make sure that you do not touch or block the flash or the

exposure sensor with your fingers. Doing so can soil these

components and interfere with correct flash operation.

Flash

Exposure sensor

• The effective range for the built-in flash is approximately

0.6m to 2m (2.0´ to 6.6´) (at full aperture).

Note that you may not be able to obtain the desired flash

result outside the ranges noted above.

• Depending on operating conditions (type of batteries being

used, temperature, etc. ), it may take up to 10 seconds for

the flash unit to charge.

• The flash does not fire in the continuous shutter mode or

movie mode. This is indicated by

screen.

on the monitor

Table of Contents