Brother NV6000D Operation Manual page 156

SEWING THE STITCHES
When the Fabric Edge Indicator Line Does Not
Appear
The built-in camera cannot detect the edge of the
fabric.
Press , and then perform the procedure again
starting with step
When the Fabric Edge Indicator Line Is Not
Aligned With the Edge of the Fabric
The fabric edge indicator line that appears is not
aligned with the edge of the fabric. The fabric at the
beginning of sewing is not straight.
Try to straighten the edge of the fabric at the
beginning of sewing (so it is parallel with the edge of
the presser foot).
142
a
.
Note
• If a straight part of fabric edge indicator line
(shown below) does not follow the edge of
the fabric, edge sewing cannot be sewn cor-
rectly.
b
a Straight part
b Fabric
j
While checking the screen for the distance
from the fabric edge to the edge sewing
position, move the fabric to the desired
position.
* The starting point of the fabric edge indicator line
shows the position for the start of sewing. The actual
position for the start of sewing is directly below the
needle and parallel to the starting point.
a Distance from edge of fabric
a
a