Advertisement
Ｉ Ｎ Ｓ Ｔ Ｒ Ｕ Ｃ Ｔ Ｉ Ｏ Ｎ Ｍ Ａ Ｎ Ｕ Ａ Ｌ
PROFESSONAL AIRBRUSH
Be sure to observe warnings, cautions and instructions in this instruction manual.
Inadvertent jetting of paint or inhalation of organic solvents can cause serious bodily injury.
Be sure to observe important items especially those shown by the marks below.
あ
WARNING
あ
CAUTION
Important
Ｓ ｐ ｅ ｃ ｉ ｆ ｉ ｃ ａ ｔ ｉ ｏ ｎ ｓ
MODEL
TYPE OF
FEED
HP-BS
HP-CS
GRAVITY
HP-SBS
HP-BCS
SUCTION
BCS
When ordering parts, specify gun's model, part name with ref.
No. and marked No. of air cap set, fluid nozzle and fluid needle.
和文取説は、 裏面にあります
(For Oversea's Sales)
HP‐ BS・ CS・ SBS・ BCS
Indicates a potentially hazardous situation which, if not avoided, may result in
serious injury or loss of life.
Indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injury or property damage.
Indicates notes which we ask you to observe. They are helpful to achieve full
performance and functions of the equipment.
PATTERＮ
FLUID
NOZZLE
φ【 mm】
ROUND
0.3
0.5
Ｓ BS
This manual contains IMPORTANT
WARNINGS and INSTRUCTIONS.
Read and understand the instruction manual,
before use and retain for reference.
CUP
MAX AIR
【 ml】
PRESSURE
【 MPa】
1.5
7.0
0.29
1.5
Ｓ Ｉ Ｄ Ｅ Ｂ Ｏ Ｔ Ｔ Ｌ Ｅ
28
Ｐ Ｌ Ａ Ｓ Ｔ Ｉ Ｃ Ｂ Ｏ Ｔ Ｔ Ｌ Ｅ
■ PARTS LIST
◆
◆
◆
◆
◆
1）
◆Marked parts are wearable parts.
2）
●Indicate Common Parts For Four Models
3）
○Indicate Common Parts for HP-BS・ HP-CS・ HP-SBS.
4）
□Indicate Common Parts For HP-BＳ ・ HP-CS・ HP-SBS,BCS Specific Parts.
5）
CS・ SBS・ BCS Indicate CS,SBS,BCS Specific Parts.
6）
☆Body differs according to model.
− 1 −
Ｎ Ｏ Ｔ Ｅ
№
Description
Ｎ ｅ ｅ ｄ ｌ ｅ Ｃ ａ ｐ
1
Ｎ ｏ ｚ ｚ ｌ ｅ Ｃ ａ ｐ
2
Head Cap
3
Ｎ ｏ ｚ ｚ ｌ ｅ
4
Nozzle Gland Set
5
Head O Ring
6
Ｂ ｏ ｄ ｙ
7
Oring
8
Needle packing Ｓ ｃ ｒ ｅ ｗ
9
Ｍain Ｌ ｅ ｖ ｅ ｒ
17
Ｎ ｅ ｅ ｄ ｌ ｅ Ｃ ｈ ｕ ｃ ｋ ｉ ｎ ｇ Ｇ ｕ ｉ ｄ ｅ
19
ｗ ｉ ｔ ｈ Ａ ｕ ｘ ｉ ｌ ｉ ａ ｒ ｙ Ｌ ｅ ｖ ｅ ｒ
Ｎ ｅ ｅ ｄ ｌ ｅ Ｓ ｐ ｒ ｉ ｎ ｇ
21
Ｓ ｐ ｒ ｉ ｎ ｇ Ｇ ｕ ｉ ｄ ｅ
22
Ｎ ｅ ｅ ｄ ｌ ｅ
23
Ｎ ｅ ｅ ｄ ｌ ｅ Ｃ ｈ ｕ ｃ ｋ ｉ ｎ ｇ Ｎ ｕ ｔ
24
Cap
26
Lid for cup
28
Cup Set (1/8oz)
29
Blankig Cover
30
Plastic Bottle
31
Ｓ ｐ ａ ｎ ｎ ｅ ｒ
32
HP-BS
HP-CS
HP-SBS
HP-BCS
Q'ty
●
□
●
BCS
○
●
☆
●
●
●
●
□
●
□
●
□
CS
SBS
SBS
BCS
○
Advertisement
Table of Contents
Related Manuals for Iwata HP-BS
Summary of Contents for Iwata HP-BS
- Page 1 ○ 1） ◆Marked parts are wearable parts. 2） ●Indicate Common Parts For Four Models 3） ○Indicate Common Parts for HP-BS・ HP-CS・ HP-SBS. When ordering parts, specify gun’s model, part name with ref. 4） □Indicate Common Parts For HP-BＳ ・ HP-CS・ HP-SBS,BCS Specific Parts. No. and marked No. of air cap set, fluid nozzle and fluid needle. 5）...
- Page 2 Warnings for safe operation あ WARNING Fire or explosion hazard 1. Painting job site must be free of open flames. *Paint is flammable and combustible (organic solvent base paints such as lacquer or ceramic varnish). *Never expose to flammable materials such as cigarettes or electrical equipment . 2.
- Page 3 ●Spraying * Filter color material with fine filter paper (cloth), or pigments may clog nozzle. * When spraying lacquer or varnish, add retarder to prevent whitening. * Never damage nozzle cap or nozzle. If done, it will adversely affect atomization. * Do not mix different color material (example: paint and dyestuff).
- Page 4 Nozzle is clogged. Clean nozzle. Atomizing air pressure is too low. Increase air pressure. Paint viscosity is too high. Reduce its viscosity. Please contact your local anest iwata agent for inquiries. ７ ８ № 1637-00 Code № 08535580 3176, Shinyoshida-cho, Kouhoku-ku, Yokohama 223-8501 Japan − 4 −...
Need help?
Do you have a question about the HP-BS and is the answer not in the manual?
Questions and answers