Advertisement
Quick Links
manual filling instructions KeyKeg
When manually filling a KeyKeg, the following items are required:
•
KeyKeg filling head with manometer and ball valve
•
KeyKeg dispensing head
•
Beverage hose
•
Filling stand
•
Snap-cap
•
Carbonated beverage calculator
•
Deflating tool
•
Beverage pump*
* A filling pressure of at least 2.0 bar (29 PSI) is advised when filling a KeyKeg.
Filling the keg with a pressure lower than 2.0 bar may lead to a fill level under the nominal volume of the
keg and entrapped air between the bag and container. This can potentially lead to damage of the beverage
bag.
KeyKeg Manual Filling Starter Box
general instructions
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for KeyKeg 10 L
- Page 1 Beverage pump* * A filling pressure of at least 2.0 bar (29 PSI) is advised when filling a KeyKeg. Filling the keg with a pressure lower than 2.0 bar may lead to a fill level under the nominal volume of the keg and entrapped air between the bag and container.
- Page 2 • Check if the beverage bag of the KeyKeg is completely pressed to the container wall. No unfilled spa- ces should be visible between the bag and the container wall. This in order to prevent possible damage to the bag.
- Page 3 Dispense head head head Sanitize dispensing head Remove the dust cap and Vent KeyKeg bag for discard. Do not replace the with disinfectant. 8 seconds with a KeyKeg dustcap after lling! dispensing head. filling filling filling stand stand stand 8 seconds 8 seconds filling...
Need help?
Do you have a question about the 10 L and is the answer not in the manual?
Questions and answers