Before Transporting The Scanner - Canon CanoScan N670U Product Manual

Before Transporting the Scanner

Always lock the scanning unit by pushing the lock switch toward the lock mark before moving or
transporting the scanner.
1. Disconnect the USB cable from the computer.
2. Confirm the position of the scanning unit.
Open the document cover, and confirm that the scanning unit is at the front of the
scanner. If it has not returned, follow the procedures below to return the scanning unit
to the home position.
1 Ensure that there are no items on the document glass (platen).
2 Turn on the computer.
3 Close the document cover, and connect the USB cable to the computer.
4 Start ScanGear CS-U and click the [Preview] button.
5 Confirm that the scanning unit has completely returned to the front of the
scanner.
6 Disconnect the USB cable.
3. Lock the scanning unit by pushing the lock switch toward the
lock mark (
Lock Switch
• Carrying or transporting the scanner without locking the scanning unit
may damage it. Be particularly careful to lock the scanning unit when
transporting the scanner in a vehicle.
).
Scanning Unit
Confirm that the scanning
unit is in this position
Locked
8