Installing The Fine Cartridges - Canon PIXMA iP6210D Quick Start Manual

Installing the FINE Cartridges

• Never attempt to plug the power cord into the power outlet or unplug the power cord when your hands are wet.
• Never damage, modify, stretch, or excessively bend or twist the power cord. Do not place heavy objects
on the power cord.
• Never use any power supply other than the standard power supply available in the country of purchase.
Using the incorrect voltage and frequency could cause a fire or electric shock.
• Always push the plug all the way into the power outlet.
• For safety reasons, store FINE Cartridge out of the reach of small children.
• Do not drop or shake FINE Cartridge as this may cause the ink to leak out and stain your clothes and
hands.
To the FINE
Cartridge
holder
Protective tape
1 1 1 1
Open the card slot cover first and the
front cover next.
The FINE Cartridge holder automatically moves to the left.
2 2 2 2
Take out the Color FINE Cartridge
(CL-51) from its box.
3 3 3 3
Remove the protective tape gently.
• Do not touch the electrical
contacts or print head nozzles
on a FINE Cartridge.
• Handle the removed
protective tape carefully to
avoid getting your hands
dirty or staining surrounding
work area.
• Do not attempt to reattach the
protective tape once you have
removed it.
4 4 4 4
Insert the Color FINE Cartridge slightly
slanted into the left slot (C).
5 5 5 5
Push up the Color FINE Cartridge until it
clicks into place.
6 6 6 6
Use the same procedure to install the
Photo FINE Cartridge (CL-52).
The Photo FINE Cartridge should be installed into the
left slot (P).
7 7 7 7
Close the front cover first and the card
slot cover next.
Wait until the preparatory operation is complete; it
takes about one to two minutes.
The message requesting head alignment is displayed
on the LCD. See "Aligning the Print Head" on page 4.
Electrical contacts
Print head
nozzles
3