Preparing The Printer; Selecting A Language Displayed On The Lcd - Canon PIXMA iP6210D Quick Start Manual

Preparing the Printer

Selecting a language displayed on the LCD

5.
7.
ON
2
1 1 1 1
Place the printer on a flat surface.
2 2 2 2
Remove the shipping tape from the front
and back of the printer.
The tape position is subject to change.
3 3 3 3
Open the card slot cover first and the
front cover next. Pull down and remove
the protective material on the right side.
4 4 4 4
Close the front cover first and the card
slot cover next.
5 5 5 5
Plug the power cord into the back of the
printer.
6.
6 6 6 6
Plug the power cord into the power
outlet.
Do not connect the USB cable at this stage.
7 7 7 7
Turn on the printer.
The POWER lamp flashes and the printer begins to
operate. Wait until the POWER lamp remains fully lit.
8 8 8 8
Select a language.
When the screen appears on the LCD;
• iP6220D
Use the
press the OK button.
If you leave the printer more than five minutes
without using any button on the operation panel,
the LCD goes into sleep mode automatically.
Press the OK button to turn on the LCD again.
• iP6210D
Use the
press the OK button.
buttons to select a language and then
buttons to select a language and then