Printing Maintenance
4
If a message warning you not to perform other operations is displayed, click
OK.
5
Check the printed pattern.
If the pattern is printed as shown below, the Print Head is aligned automatically. The
printer is now ready to use.
iP4000
62
If the pattern is not printed successfully, open the Top Cover and Inner
Cover, and ensure that the ink tanks are correctly installed.
If the pattern is still not printed successfully, refer to "Eleven flashes"
in
"H H andling Error Messages"
(3) Read the message and click P P rint
Head Alignment.
It takes about 60 seconds to
start printing. Do not open the
Top Cover while printing.
iP3000
on page 75.