Canon PIXMA iP2000 Series Start Here page 2

6
®
Windows Printer Driver Installation
1 Turn the computer on and LEAVE THE PRINTER OFF .
NOTE: For Windows ® XP or Windows 2000, log on to
Windows as an Administrator before continuing.
IMPORTANT: If you see the Found New Hardware
Wizard, click Cancel.
2
Close any open software applications including anti-virus,
computer security and other software. Then insert the
"Setup Software & User's Guide" CD-ROM. The setup
program should run automatically.
NOTE: If the setup does not run automatically, click Start,
then Run, then type D:\msetup.exe, where D is your
CD-ROM drive.
3 When the main menu appears, click Easy Install and
follow on-screen instructions.
NOTE: Select Easy Install in order to install application
software, electronic manual and printer driver. Select
Custom Install in order to choose the options you would
like to install.
4 When the "Easy Install" window appears, click Install.
5 Read the License Agreement, then click Yes to continue.
Then, installation of the driver and electronic instruction
manual starts.
6 When the "Printer Connection" window appears, TURN THE
PRINTER ON. The printer will initialize for about one minute.
IMPORTANT: If your computer cannot detect a
computer port, click Help and refer to the online
instructions.
7 Follow the on-screen instructions to install the remaining
software. When the "Installation Results" window
appears, click OK.
8
Follow the on-screen instructions to register your product.
9 When the "Installation completed successfully" window
appears, click Exit.
NOTE: If a message prompting you to restart the computer
appears, click Restart.
NOTE:
· When you print out for the first time, it takes approximately
one minute until the printer starts printing.
· If print quality is not satisfactory after installing the printer,
you may need to align the print head. Refer to "Aligning the
Print Head" instructions in your Quick Start Guide.
QA7-3263-V02 ©2004 Canon Inc. Canon is a registered trademark of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice. Printed in Thailand
6
®
Mac OS X Printer Driver Installation
NOTE: For Mac OS 9.x printer driver instructions, refer to the
"Appendix" of the Quick Start Guide.
1
Turn on your Mac and your printer and insert the "Setup
Software & User's Guide" CD-ROM.
NOTE: The printer will initialize for about one minute.
2 Double-click the CD-ROM icon, then the Mac OS X folder,
then the Printer Driver folder.
3
Double-click the PIXMA iP2000 280.pkg icon.
NOTE: When the "Authenticate" screen appears, enter your
administrator name and password.
If you do not know your administrator name or password,
click , then follow the on-screen instructions.
4 When the "Welcome to the BJ printer driver Installer"
screen appears, click Continue.
5
Read the Software License, click Continue, and then click
Agree.
6 Select a destination for the printer driver to be installed.
Then click Continue.
Click Install. When the "Authenticate" screen appears,
7
enter your administrator name and password, then click
OK.
NOTE: If you do not know your administrator name or
password, click , then follow the on-screen instructions.
8 When a message asking for your confirmation to proceed with
the installation, click Continue Installation.
9 When the message "The software was successfully
installed" appears, click Restart.
10 Access your CD-ROM again. From the Application folder,
double-click the Easy-PhotoPrint icon. Follow the on-
screen instructions.
When the "Installation is completed"
11
screen appears, click OK.
Double-click on the Product Registration icon, found
12
in the Mac OS X folder, to register your product.
NOTE:
· When you print out for the first time, it takes approximately
one minute until the printer starts printing.
· If print quality is not satisfactory after installing the printer,
you may need to align the print head. Refer to "Aligning the
Print Head" instructions in your Quick Start Guide.