Connecting A Power Source And The Camera To The Printer - Canon CP-220 User Manual

Connecting a Power Source and the Camera to
the Printer
Connect the camera to the printer using the cable (included with the camera)
and turn the printer's power on.
For more detailed camera connection instructions, refer to your Camera User
Guide or Direct Print User Guide.
1
15 cm (6 in.) at the
front and back of the
devices and 10 cm
(4 in.) on both sides or
more of open space
* PictBridge Compliant Non-Canon Printers can also be connected.
The numbered steps in the following instructions refer to the numbers in the above
illustration.
1
Place the printer on a flat area.
• Be sure to leave about 15 cm (6 in.) of clearance around the paper-handling slot
(at the rear) so that paper has sufficient room to jut out from the slot during
printing.
2
Connect the supplied power cord to the supplied Compact
Power Adapter CA-CP100.
3
Insert the plug in a power outlet.
28
Canon camera* compatible with CP-330/CP-220
To DIGITAL Terminal
7
6
4
Compact Power Adapter
5
To DC IN Terminal
Interface cable
included with
the camera
Camera's Compact Power Adapter
(sold separately or included with the
camera)
* Please use the camera's compact
power adapter or a fully charged
battery pack (or charged batteries).
2
3
To Power Outlet
To Power
Outlet