When To Replace Ink Tank And Maintain Printhead - Canon BJC-S9000 User Manual

When to Replace Ink Tank and Maintain Printhead

When an ink tank is empty, it must be replaced.
The BJ Status Monitor (Windows) or the BJ Print Monitor (Macintosh) will initially advise
you of a low ink level. At this stage, you can still continue to print.
Once an ink tank is empty, the BJ Status Monitor (Windows) or the BJ Print Monitor
(Macintosh) will tell you to replace the ink tank. Attempting to print causes the POWER
lamp to flash four times.
If printing becomes faint or a specific color is no longer printing, even though there is still
enough ink, the printhead nozzles are probably clogged. Follow the procedures below to
clean the nozzles.
If printhead deep cleaning does not resolve the problem, the printhead may be worn out.
Contact the Customer Care Center.
➡
Replacing an Ink Tank
➡
Printing the Nozzle Check Pattern
If the print quality is poor
➡
Printhead Cleaning
If the problem remains
➡
Printhead Deep Cleaning
When to Replace Ink Tank and Maintain Printhead
Routine Maintenance
67