Advertisement
Quad Phase HP
Disconnect the unit from its power source. Remove the power cord from the unit. Once
the cord has been removed, you will find that the fuse holder is located inside the power
socket. Insert a flat-head screw driver into the power socket and gently pry out the fuse
holder. Remove the bad fuse and replace with a new one. The fuse holder also has a
holder for a spare fuse.
Quad Phase HP
Trouble Shooting: Listed below are a few common problems that you may encounter,
with solutions.
No light output from the unit:
1. Be sure the external fuse has not blown. The fuse is located on the rear panel of the
unit.
2. Be sure the fuse holder is completely and properly seated.
Unit does not respond to sound:
1. Low frequencies (bass) should cause the unit to react to sound. Tapping on the
microphone, quiet or high pitched sounds may not activate the unit.
2. Check the sound sensitivity level.
Quad Phase HP
Fixture Cleaning: Due to fog residue, smoke, and dust cleaning the internal and
external optical lenses and mirror should be carried out periodically to optimize light
output. Cleaning frequency depends on the environment in which the fixture operates
(I.e. smoke, fog residue, dust, dew). In heavy club use we recommend cleaning on a
monthly basis. Periodic cleaning will ensure longevity, and crisp output.
1. Use normal glass cleaner and a soft cloth to wipe down the outside casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics and mirror with glass cleaner and a soft cloth every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every 30-60 days.
5. Always be sure to dry all parts completely before plugging the unit back in.
ADJ Products, LLC - www.adj.com - Quad Phase HP - User Manual - Page 15
Fuse Replacement
Troubleshooting
Cleaning
Advertisement
