Table of Contents
Advertisement
Available languages
Available languages
FM TUNER
FM freq. range
AM freq. range
FM / AM preset
Usable sensitivity
Channel separation
Signal/noise level
USB/SD
USB system
Max. current
File system
MP3 decoder
Number of channels
Channel separation
Signal/noise level
POWER CONNECTION FOR THE ISO PLUG
A/1. No connection
A/2. No connection
A/3. No connection
A/4. Battery direct connection for memory, +12 V (yellow)
A/5. Remote only for motor car antenne or amplifier REM, +12 V (blue)
A/6. No connection
A/7. Ignition switch, +12 V (red)
A/8. Battery / Chassis GND (black)
CONNECTION OF 4 SPEAKERS FOR THE ISO PLUG
B/1. Speaker Out Right Rear +
B/2. Speaker Out Right Rear -
B/3. Speaker Out Right Front +
B/4. Speaker Out Right Front -
B/5. Speaker Out Left Front +
B/6. Speaker Out Left Front -
B/7. Speaker Out Left Rear +
B/8. Speaker Out Left Rear -
Do not connect any speaker cable to the GND of the car or the battery (with the black cable or chassis)!
87,5-108,0 MHz
522-1620 kHz
18 x FM + 12 x AM
1,8 µV
>36 dB
>56 dB
USB 2.0
500 mA only for USDB drive
FAT 16/32, max.32GB
MPEG-1/2 AUDIO Layer-3
2-CH, stereo
>74 dB
>84 dB
GENERAL PARAMETERS
Car Voltage system
Operation Voltage
BT version
BT profiles
AUX Input
Channels of amplifier
Power output
Speaker impedance
Frequency range
Pre-amp output
Fuse
T operation
Weight
Chassis dimensions
1
B
2
1
A
2
58
12 Volt Negative GND chassis
14,4 V DC (11 -15 V)
V4.1 + EDR / 5.0m
A2DP, V1.2, AVRCP, V1.4
3,5 mm stereo socket
4 CH
4 x 45 W max.
4 – 8 Ohm
20 - 20.000 Hz
1,8 V max. (2+2 x RCA)
F10A
0°C ...+40°C
540 g
178 x 50 x 110 mm
3
5
7
4
6
8
3
5
7
4
6
8
Advertisement
Table of Contents
