Table of Contents
Advertisement
Installation
3.3 19" rack mounting
NOTICE
Warming and premature aging of the IE switch due to direct sunlight
Direct sunlight can heat up the device and can lead to premature aging of the IE switch and its
cabling.
Provide suitable shade to protect the IE switch against direct sunlight.
Note
During installation and operation, keep to the installation guidelines and safety notices
described in this document and in the system manuals "Industrial Ethernet / PROFINET Industrial
Ethernet" and "Industrial Ethernet / PROFINET passive network components".
You will find information on the system manuals in the section "Introduction (Page 3)", under
"Further documentation".
3.2
Types of installation
The devices can be installed in the following ways:
• 19" rack mounting
• DIN rail
• Wall mounting
Installation position for PoE variants
Horizontal installation position is recommended for PoE variants (inscription is in the read
direction). Vertical installation position is also permissible.
3.3
19" rack mounting
Mounting
Risk of injury if subjected to irregular mechanical strain
The device must be mounted in the 19" rack so that even if there is irregular mechanical strain,
no dangerous situation can result.
24
CAUTION
Operating Instructions, 09/2020, C79000-G8976-C455-04
SCALANCE XR-100WG
Advertisement
Table of Contents
