Specifying The Machine's Ip Address (Ipv4 Only) - Canon PIXMA MX350 Network Setup Manual

10-B
WPA/WPA2
1
Enter the network key, then press the OK
button.
• Enter upper and lower case letters of the alphabet
correctly. Letters are case sensitive.
2
Make sure that the network key is correct, then
press the OK button.
Go to
.
11
When the completion screen appears, press the OK
button.
The Setup menu screen returns. Press the COPY
button.

Specifying the Machine's IP Address (IPv4 only)

Disable
Action
The machine's IP Address can be specified by the following procedure.
1
Press the Setup button.
2
Select Device settings, then press the OK button.
3
Select LAN settings, then press the OK button.
4
Select Other settings, then press the OK button.
5
Select IPv4/IPv6 setting, then press the OK button.
6
Select IPv4, then press the OK button.
7
Select Yes, then press the OK button.
8
Select Manual setup, then press the OK button.
• Follow the on-screen instructions to proceed with settings.
• When the setup is complete, press the COPY button.