Cleaning The Print Head - Canon PIXMA MP130 Quick Start Manual
Canon pixma mp130: quick start
Hide thumbs
Also See for PIXMA MP130:
- Quick start manual (106 pages) ,
- Setup instructions (2 pages) ,
- Service manual (51 pages)
Table of Contents
Advertisement
CAUTION
• Do not touch the ink port (B).
• Do not shake or drop the ink tank as the ink may leak
and stain your clothes or hands.
• Do not attempt to reattach the protective cap once you
remove it.
• Do not place the ink port in contact with any other
surface.
7
Insert the ink tank into the empty slot on
the print head.
8
If you need to replace another ink tank, repeat steps 5 to 7.
9
Close the Inner Cover.
CAUTION
• Press the center of the Inner Cover until the cover locks into place.
10
Return the Scan Unit to its original position.
11
If you replaced the black ink tank, press [ ]. If you did not, press [ ].
12
If you replaced the color ink tank, press [ ]. If you did not, press [ ].
Cleaning The Print Head
If the printed nozzle check pattern is broken, missing, or a specific color is not printed,
clean the print head.
1
Press [Menu] repeatedly until <USER DATA> appears.
2
Use [ ] or [ ] to select <MAINTENANCE>, and then press [OK].
3
Use [ ] or [ ] to select <CLEANING> or <HEAD REFRESHIN> as
necessary.
–<CLEANING>:
–<HEAD REFRESHIN>:
4
Press [OK].
Chapter 6
Performs normal print head cleaning.
Performs deep print head cleaning.
(B)
Maintenance
27
Advertisement
Table of Contents
Troubleshooting
