Advertisement
W8710A EQUIPMENT MONITORING SYSTEM
SPECIFICATIONS
Model: W8710A Equipment Monitoring System. See Table 1
Dimensions: See Fig. 1.
Electrical:
Power Supply:
Rechargeable back-up power supply provides energy to
send an electrical outage report during a power outage
longer than one hour.
Runs on 24 Vac from the heating and cooling system.
Accessories:
Required (Not Included):
32005322-001 Handheld Programmer
Model
Application
W8710A
Monitoring and
reporting of
conventional and
heat pump
systems.
ORDERING INFORMATION
When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the
TRADELINE® Catalog or price sheets for complete ordering number.
If you have additional questions, need further information, or would like to comment on our products or services, please write or
phone:
1. Your local Home and Building Control Sales Office (check white pages of your phone directory).
2. Home and Building Control Customer Relations
Honeywell, 1885 Douglas Drive North
Minneapolis, Minnesota 55422-4386 (800) 468-1502
In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V4Z9.
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,
Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.
68-0256
Table 1. W8710A description.
Inputs
Return Sensor, Discharge
Sensor, Handheld
Programmer, Customer
Alert Switch, Thermostat
(R,C,W/Y, Y/O, G W2),
EXT. TEMP
(GRN,YEL,RED) F1, F1,
F2, F2.
2
Optional (Not Included):
32005419-001 Customer Alert Switch.
32005320-001 Water Alert Float Switch.
32005321-001 External Air Temperature Sensor.
Approvals:
Underwriters Laboratories Approved: Electrical compo-
nents.
Federal Communication Commission: Part 68 regulations.
On-line Service Registration:
32005322-001 Handheld Programmer is required to install
the W8710A and register for service.
Outputs
Telephone
Use with optional Customer Alert Switch
Out.
(part no.32005319-001) and/or Water Alert Float
Switch (part no. 32005320-001).
Use the External Air Temperature Sensor
(part no. 320005321-001) when monitoring heat
pump systems.
The W8710A must be programmed with the
Handheld Programmer (part no. 32005322-001).
Comments
Advertisement
