Replacing The Date/Time Battery - Canon EOS 20D Instruction Manual

Digital af slr camera with a large, fine-detail, 8.20-megapixel cmos sensor
Hide thumbs Also See for EOS 20D:
Table of Contents

Advertisement

Replacing the Date/Time Battery

The date/time (back-up) battery maintains the camera's date and time.
The battery's service life is about 5 years. If the date/time is reset when
the battery is replaced, replace the back-up battery with a new CR2016
lithium battery as described below.
The date/time setting will also be reset, so you must set the
correct date/time.
For the date/time battery, be sure to use a CR2016 lithium battery.
1
Turn the <4> switch to <2>.
2
Open the cover and remove the
battery.
3
Take out the battery holder.
4
Replace the battery in the battery
(–)
(+)
holder.
¡
5
Close the cover.
Make sure the battery is in the proper
+ – orientation.
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents