Canon EOS 20D Instruction Manual page 122

wPrinting with PictBridge
¡
Depending on the image's file size and recording quality, it may take
some time for the printing to start after you select [Print].
¡
The [Default] setting for printing effects and other options are the
printer's own default settings as set by the printer's manufacturer. See
the printer's instruction manual to find out what the [Default] settings are.
Handling Printer Errors
If you resolve a printer error (no ink, no paper, etc.) and select [Continue] to
resume printing but it does not resume, operate the buttons on the printer to
resume printing. For details, see the printer's instruction manual.
Error Messages
If a problem occurs during printing, an error message will appear on the
camera's LCD monitor. Press <0> to stop printing. After resolving the
problem, resume printing. For details on how to resolve a printing problem,
refer to the printer's instruction manual.
Paper Error
Check whether the paper is properly loaded in the printer.
Ink Error
The printer has run out of ink or the waste ink tank is full.
Hardware Error
Check for any printer problems other than paper and ink problems.
File Error
You attempted to print an image that cannot be printed with PictBridge.
Images taken with a different camera or images edited with a computer
might not be printable.
122
5
Start printing.
¡
Turn the <5> dial to select [Print],
then press <0>.
s
The printing will start.
¡
When the printing ends, the screen
will return to step 1.
¡
To stop the printing, press <0> while
[Stop] is displayed, then turn the
<5> dial to select [OK] and press
<0>.