Trimming Images - Canon EOS 10D Instruction Manual

Trimming Images

You can trim an image within your desired range.
Select the [Tools] menu [Start Trimming tool].
1
The trimming window appears.
Trim the image.
2
Select a ratio from the [Aspect ratio] list box, and drag the trimming range as shown in
the diagram.
Displays the coordinate position of the cursor.
When you have set the trimming range, the upper left and lower right XY coordinates,
width, height and aspect ratio of the frame are displayed.
If you move the cursor in the trimming range you have set, the [
You can move the trimming range by dragging.
If you move the cursor to the four corners of the trimming range you have set, the
[ ] changes to [ ]. You can change the trimming range size by dragging.
When [Free] is selected in the [Aspect ratio] list box, move the cursor to all four sides
of the set trimming range and [ ] will change to [
trimming range can be changed by dragging.
Select the vertical/horizontal
ratio of the trimming range.
Displays the upper left
coordinates of the trimming range
you have set. You can also set the
coordinates by entering your
desired numbers.
Copies the trimming range you
have set.
Displays borders around the
trimming range.
Displays the full screen. To return
to the original view, click this
button again.
To switch between full screen
display/normal screen display,
press the <
the keyboard.
Click the [OK] button.
3
] changes to [ ].
] or [ ]. The size of the
> + <F11> keys on
Cancels all settings and closes the window.
*Functions when you have selected multiple images and the trimming windows are displayed.
You can also set the [Aspect ratio] and switch between full screen/normal screen from
the menu that appears by clicking on the image while holding down <control> key.
For information on shortcut keys, refer to the "Shortcut List" (p.5-3).
Returns settings to the original
settings.
Displays the ratio selected from
the [Aspect ratio] list box. You
can also enter your own ratio
when you select [Custom] from
the [Aspect ratio] list box.
Displays the size of the
trimming range you have set.
You can also set the size by
entering your desired numbers.
The trimming range copied
from another image is reflected
in the image displayed.*
Drag the slider left or right to set
the level of opacity outside the
trimming range.
Displays the next image.*
Displays the previous image.*
Applies the settings and closes the window.
1-10
Cover/Table of
Contents
Introduction
Displaying Thumbnail Images 1
and Performing Basic Edits
in the Main Window
2
Performing Detailed
Edits in the Edit
Window
3
Performing Detailed
Edits in the Edit
Image Window
Displaying an 4
Image in the Quick
Check Window
5
Reference
Index