Final Setup - Cambridge SoundWorks BassCube 10S User Manual

FINAL SETUP

Power Connections
Make sure the BassCube's power switch is in the OFF
position. Insert the BassCube's power cable into an
AC wall outlet (The switched accessory outlets on
receivers are not recommended for use with a
BassCube). Turn the BassCube's power switch to the
AUTO position.
Test Your Setup
Once all connections have been made, test your
sound system to verify that the subwoofer produces
bass output. Advance the SUBWOOFER LEVEL
control to the 10 o'clock position. Turn on your receiver
and play a CD or movie you know to have significant
bass. Listen for the subwoofer ouput as you increase
your receiver's volume control up to a moderate
volume level. If you don't hear any output from the
subwoofer, slowly advance the SUBWOOFER LEVEL
until you hear output.
If you still don't get any output, recheck
your connections.
11 11 11