Attaching Labels - Brother P-touch 1750 User Manual

4
Insert the tape cassette firmly into the tape
compartment, making sure that the entire
back of the cassette touches the bottom of the
compartment.
When inserting the tape cassette, make
sure that the inner ribbon does not
catch on the corner of the metal guide.
5
Close the compartment cover, then turn on
the machine if it is off.
Hold down f and press g once to
6
advance the tape and remove any slack.
7
Push down on the tape cutter lever to cut off
any excess tape.
STICK
A stick is enclosed in the right side of the tape compartment cover of the P-touch. Use this
stick when pasting laminated tape to an object.
1
Open the tape compartment cover.
2
Pull the tip of the stick towards you with your finger.
3
Hold the tip of the stick and pull up to remove it.
6

ATTACHING LABELS