Handling And Installation - GE CompactPCI VMIACC-7055 Series Installation Manual

1 • Handling and Installation
The VMIACC‐7055*/ACC‐7055RC* rear transition modules (RTMs) are designed
to be used with the VMICPCI‐7055*/CPCI‐7055RC* single board computers
(SBCs). The rear transition module is mounted in the rear I/O area of the chassis
and provides associated signals from the front mounted SBC. The signals are
routed to the backplane through the J3 and J5 connectors. The J4 connector is used
for alignment only and has no electrical connections.
The VMIACC‐7055/ACC‐7055RC boards are full 6U form factor boards with a
CompactFlash connector, an internal IDE header, two COM ports, two LAN ports
(option dependent), and one PIM site.

Handling and Installation 6