Care; Troubleshooting; Completing Units; Storing The Appliance - Electrolux ECH/AG2-1000 3BI-W EEC User Manual

Care

The convector does not require any special
maintenance. Before servicing (leaving)
the convector must be disconnected from
the power supply.
The body of the device should be periodically
wiped with a soft, lint-free cloth or damp
sponge. Never use abrasive, foaming
detergents or solvents. It is quite easy to clean
the space behind a wall-mounted heater.
Press down the two latches on the back of
the heater and pull the heater forward. After
it is removed, you can wash the wall on which
it was installed.
After finishing cleaning, put the heater back
in its normal operating position.
Recommended indoor temperature
and humidity:
a) for the convector operation: from -25°С
to + 30°С, humidity from 40% to 90%;
b) for the storage of the convector: from -20°C
to + 80°С, humidity from 40% to 90%.

Completing units

1. Electric heater
2. Wall mounting bracket
3. Mounting template
4. A set of fasteners
5. Operation manual

Storing the appliance

Make sure the heater is cool before storing
it. It is recommended to clean the heater and
store (preferably in the original packaging) in
a cool dry place in case you plan not to use
device for a long time.

Recycling

The time-expired appliance can't be
disposed with household waste (2012/19/EU).

Warranty

Warranty service is performed according
to the terms specified in the "Warranty"
section.
Warranty:
• Warranty period for the item is two years
from the purchase date. If any defects
occur due to defects in materials and/or
workmanship during this two-year warranty
period, the item should be repaired
or replaced.
• Free maintenance or replacement
is possible only in case if convincing
evidence is provided, for example a stub,
which confirms that the day when
the service is requested, is within
the warranty period.
• The warranty does not cover products
and/or parts of the product that
are subjects to deterioration, may
be considered as expendable supplies
or which are made of glass.
• The warranty is void if the defect
is caused by damage ensuing by misuse,
poor maintenance (for example, a failure
occurred due to ingress of foreign objects
or liquids) or if changes or repairs were
performed by persons not authorized
by the Manufacturer.
• For the correct use of the product,
the user must strictly follow all included
in the manual instructions, and also
must avoid any action or manipulation
described as unwanted or indicated so
in this manual.
• These warranty restrictions do not affect
your statutory rights.
Support:
The support during and after the warranty
period is available in all countries where
the product is officially distributed. Please
contact your dealer for help.
Date of manufacture
The date of manufacture is indicated on
a sticker on the body of the appliance,
and also encrypted in Code-128. The date
of manufacture is determined as follows:
month and year of production
Do not remove and keep safe the serial
number on the device's body. If the serial
number sticker is lost or damaged, it will
not be possible to restore the production date
if necessary.
Manufacturer/Importer: SIA "Green Trace",
LV-1004, Biekensalas iela, 21, Riga, Latvia.
E-mail: info@greentrace.lv
11
ENGLISH