For Brother Peer-To-Peer Network Printer Users (Netbios); Connecting The Printer To Your Network And Installing The Driver; Brother Peer-To-Peer Network Printer Users (Netbios) - Brother HL-5070N Series Quick Setup Manual

Step 2
For Network Interface Cable Users
For Brother Peer-to-Peer Network Printer Users
(NetBIOS)
If you are going to connect the printer to your network, we recommended that you contact your system
administrator prior to installation.

Connecting the Printer to Your Network and Installing the Driver

1
Click Connect the interface cable &
Install the driver/utility from the Initial
Setup menu.
2
Select the Network interface.
3
Turn off the printer power switch.
18
Installing the Driver
4
Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
5
Turn on the printer power switch.
6
Click the Next button when the movie
finishes.