Subscribe to Our Youtube Channel
Summary of Contents for COMPANION LP GAS LANTERN
- Page 1 LP GAS LANTERN 200 WATT AS 2658 Cert. GSCS20059 AUSTRALIA ONLY GAS SAFETY CERTIFICATION SAI Global OWNERS MANUAL Part No. 2162-65 (MANUAL IGNITION), 2169-65 (PIEZO IGNITION)
-
Page 2: General Warnings
IMPORTANT: Read these instructions for use carefully. Familiarise yourself with the appliance before connecting it to its gas container. Keep these instructions for future reference. GENERAL WARNINGS SAFETY INFORMATION This appliance shall only be used with an LPG (Propane) Inspect the appliance regularly for signs of wear, leaks refillable cylinder certified to Standard AS 2469 that has or incorrect operation. -
Page 3: Carbon Monoxide Hazard
LP GAS LANTERN OWNERS MANUAL CARBON MONOXIDE HAZARD Using this appliance in an enclosed space may cause DEATH. Do not use in caravans, tents, marine craft, cars, mobile homes or similar locations. This appliance is designed for connection directly to the cylinder - DO NOT USE ADAPTORS. - Page 4 UNDERSTANDING YOUR APPLIANCE 2162-65 2169-65 CARRY HANDLE CARRY HANDLE CYLINDER CONNECTION CYLINDER CONNECTION FROSTED GLASS PIEZO IGNITION FROSTED GLASS...
-
Page 5: Mantel Installation
LP GAS LANTERN OWNERS MANUAL MANTEL INSTALLATION PRE-CONDITION PROCESS Step 1. With the lantern attached to the LP gas This process is important as it prepares the mantel for cylinder, remove the carry handle and top cover and the first time use by converting the cloth fibers to leave a... -
Page 6: Safe Locations
NEVER check for leaks with a flame or pilot light. Example 1 Check for leaks using Companion Gas Leak Detection Spray or soapy water, coat all connections, if bubbles appear turn the cylinder gas control off and re-tighten the connection before re-testing. - Page 7 LP GAS LANTERN OWNERS MANUAL IMPORTANT INFORMATION FOR USE During operation all surfaces will be extremely hot and should not be touched or handled. Take care that the primary air intakes, located on the burner tube of this appliance are not obstructed, or that air flow is restricted by placing items or other appliances close to or adjacent to the inlets.
- Page 8 CONNECTION LIGHTING LANTERN (MANUAL AND PIEZO) Step 1. Take the lantern connector and attach to the gas inlet on the appliance, tighten up using a spanner. Step 1. Turn the Gas Control Valve 1/4 of a turn. Step 2. Turn the cylinder gas valve on in an anti- Step 2.
- Page 9 LP GAS LANTERN OWNERS MANUAL ADJUSTING FLAME NOTE: If the lantern does not ignite, turn the gas control in the clockwise direction to the OFF position Turn the gas control in an anti-clockwise direction and allow the residual gas to disperse before to achieve a higher brightness and in the clockwise attempting to reignite the burner.
-
Page 10: Care Instructions
Part no. 2162-65 / 2169-65 Using warm soapy water with a mild detergent wipe Model no. LP Gas Lantern down all surfaces and areas of the appliance, taking Gas type Propane care not to allow water to enter the burner outlets or Gas jet size 0.12 mm +/- 0.01... - Page 11 LP GAS LANTERN OWNERS MANUAL NOTES...
- Page 12 Distributed by: Adventure Trading Australia Pty Ltd www.companionleisure.com.au...
Need help?
Do you have a question about the LP GAS LANTERN and is the answer not in the manual?
Questions and answers