Brother HL HL-3070CW User Manual page 99

Network for HL-3070CW users
Submenu 1 Submenu 2
Wired LAN TCP/IP
Ethernet
Set to
Default
Wired
Enable
WLAN TCP/IP
SES/WPS/AO
SS
WPS w/PIN
Code
The factory settings are shown in Bold with an asterisk.
Menu Selections Options
Boot Method Auto*/Static/RARP/BOOTP
/DHCP
IP Address ###.###.###.###
(000.000.000.000)*
Subnet Mask ###.###.###.###
(000.000.000.000)*
Gateway ###.###.###.###
(000.000.000.000)*
##### (3*)
IP Boot Tries
APIPA On*/Off
IPv6 Off*/On
Auto*/100B-FD/100B-HD/
10B-FD/10B-HD
Restores wired network settings of the internal print server to the factory default.
On*/Off
Boot Method Auto*/Static/RARP/BOOTP
/DHCP
IP Address ###.###.###.###
(000.000.000.000)*
Subnet Mask ###.###.###.###
(000.000.000.000)*
Gateway ###.###.###.###
(000.000.000.000)*
# (3*)
IP Boot Tries
APIPA On*/Off
IPv6 Off*/On
Descriptions
Choose the IP method that best
suits your needs.
Enter the IP address.
1
Enter the Subnet mask.
1
Enter the Gateway address.
Automatically allocates the IP
address from the link-local
1
address range.
Chooses Ethernet link mode.
Chooses Ethernet link mode.
Choose the IP method that best
suits your needs.
Enter the IP address.
1
Enter the Subnet mask.
1
Enter the Gateway address.
Automatically allocates the IP
address from the link-local
1
address range.
Control Panel
3
89