Using the BR-Script3 printer driver
®
(Post Script
(HL-3070CW only)
Note
• To use the BR-Script3 printer driver on a Network, see the Network User's Guide on the CD-ROM.
• To use the BR-Script3 printer driver, you need to set the Emulation to BR-Script3 by using the control
panel before connecting the interface cable. (See Print Menu on page 85.)
Installing the BR-Script3 printer driver
You need to install the BR-Script3 printer driver using the following instructions.
Note
If you use a USB cable, only one printer driver per printer can be registered in the Printer Setup Utility.
Before installing the BR-Script3 printer driver, delete from the Printer list any other Brother drivers that are
for the same printer.
For Mac OS X 10.3.9 and 10.4.x
a
Turn on your Macintosh.
b
From the Go menu choose Applications.
3™ language emulation for Macintosh)
Driver and Software
2
2
2
65