Brother HL HL-3070CW User Manual page 155

Maintenance messages
Error message
1
Toner Low (X)
Drums End Soon
1
Drum End Soon(X)
Belt End Soon
WT Box End Soon
Replace Toner
Replace Drums
1
Replace Drum (X)
Replace Belt
Replace WT box
Replace PF Kit1
Replace Fuser
1
(X) shows the toner cartridge or drum unit colour that is near the end of its life. (K)=Black, (Y)=Yellow, (M)=Magenta, (C)=Cyan.
Call service messages
Call service message
Print Unable ##
(Except Print Unable 1A)
Meaning
The toner cartridge is near the end of
its life.
The drum units are near the end of
their life.
The drum unit for the colour indicated
on the LCD is near the end of its life.
The belt unit is near the end of its life.
The waste toner box is almost full.
It is time to replace the toner cartridge. Replace the toner cartridge for the colour indicated
It is time to replace the drum units.
It is time to replace the drum unit for
the indicated colour.
It is time to replace the belt unit.
It is time to replace the waste toner
box.
It is time to replace the paper feeding
kit 1.
It is time to replace the fuser unit.
Action
Turn off the printer. Wait a few seconds, then turn it on again. If this does not clear the
error, call your dealer or a Brother Customer Service.
Action
Buy a new toner cartridge for the colour that is
indicated on the LCD before you get a Replace
Toner message.
Buy a new drum unit set before you get a Replace
Drums message.
Buy a new drum unit for the colour indicated on the
LCD before you get a Replace Drum (X)
message.
Buy a new belt unit before you get a Replace
Belt message.
Buy a new waste toner box before you get a
Replace WT Box message.
on the LCD. (See Replacing the toner cartridges
on page 105.)
Replace the drum units. (See Replacing the drum
units on page 113.)
Replace the drum unit for the colour indicated on
the LCD. (See Replacing the drum units
on page 113.)
Replace the belt unit. (See Replacing the belt unit
on page 118.)
Replace the waste toner box. (See Replacing the
waste toner box on page 123.)
Replace the paper feeding kit 1. Call your dealer or
Brother Customer Service.
Replace the fuser unit. Call your dealer or Brother
Customer Service.
Troubleshooting
6
145