Scanner Unit - Brother HL HL-1060 Service Manual

Brother laser printer service manual
Table of Contents

Advertisement

3.9

Scanner Unit

(1)
Remove the three screws.
(2)
Lift out the scanner unit.
Screw
Scanner unit
Main cover
(3)
Disconnect the three connectors from the driver PCB.
(4)
Remove the screw and the tape, and lift the toner sensor PCB from the scanner
unit.
Note:
Never touch the inside of the scanner unit or the mirror when disassembling or
reassembling. If there is any dirt or dust on the mirror, blow it off.
Toner sensor PCB
Tape
Screws
Fig. 3.21
Screw
Scanner unit
Fig. 3.22
III-14
Driver PCB

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hl-1060

Table of Contents