Frequency Setting; Trouble Shooting And Technical Specification - Bluetti EB120 User Manual

Q2: Can this product be used to charge my electronic devices?
You need to check the power at each output port. For example, the power at AC output
port is provided by the built-in inverter of the product, whose maximum continuous
output power is 1000W. This means that it is only suitable for electronic device whose
required power is no more than 1000W.
Intelligent Cooling Control
Cooling fan will start working automatically when the following conditions are
met :
1. The load of inverter exceeds 400w.
2. The load of 12V cigarette lighter socket exceeds 80w.
3. The charging power of attached appliances exceeds 100W.
Besides, generator intelligent system will adjust the PV input or AC output power
based on the outer case temperature, to keep the outer case at a touchable
temperature.
Note: Do not use the machine when the cooling tan is broken.

Frequency Setting

When the product is powered on, turn on DC output and keep the AC output turned off.
Press and hold both DC button & AC button to enter setting mode Press AC power
button to choose inverter AC output frequency.Press and hold both DC and AC power
button to exit frequency setting mode Restart the machine.

Trouble shooting and technical specification

Error
Over-voltage protection
E001
(battery pack)
Under-voltage protection
E002
(battery pack)
E003 Battery failure
Over-temperature protection
E004 when dis- charging the
battery.
Problem
Stop charging and start discharging.
Please charge the product in time. Restart the
machine once it is fully charged.
Restart the machine and charge it.
Wait for a while for it to cool down and then
restart the machine.
8
Solution