Quick start guide
What's in the box
Check and identify the contents of your package::
a Main unit
b Remote control
c Front panel
d Trim plate
e Carrying case for front panel
f Sleeve
g Rubber cushion
h Screws x 4 pcs
i ISO male connectors
j Disassembly tools x 2 pcs
k User manual
l Quick start guide
m DAB Antenna
Select country/region
1
Press
to turn on the unit.
2
Rotate
to select an option:
•
[USA] (United States)
•
[Latin] (Latin America)
•
[Europe] (Western Europe)
•
[ASIA] (Asia Pacific)
•
[Mid-East ] (Middle East)
•
[Russia] (Russia)
3
Press
to confirm.
Turn on
1
Press
to turn on the unit.
•
To turn off the unit, press
3 seconds.
Set clock
1
Press MENU.
2
Press
/
repeatedly until [CLK SET]
displays.
3
Rotate
to set hour.
4
Press
to confirm.
5
Rotate
set minute.
6
Press
to confirm.
Listen to radio
1
Press SOURCE repeatedly to select radio
mode.
CEM3000B_05_QSG_V1.0.indd 2
All manuals and user guides at all-guides.com
2
Press BAND/
[FM3], [AW1] or [AW2].
3
Press
manually.
The radio station is broadcast.
»
To search for a radio station
»
automatically, press
3 seconds.
Listen to DAB
1
Press SOURCE on the main unit repeatedly
to select DAB/DAB+.
The system performs auto scan.
»
All the available DAB stations are stored.
»
The radio tunes to the first available
»
station.
Play a disc
1
Insert a CD with the printed side facing up.
Play starts automatically.
»
•
To pause CD play, press
•
To resume CD play, press
•
To skip to the previous/next track, press
or
•
To search backward/forward rapidly
within the current track, press
for 3 seconds.
Play from USB
for over
1
Slide the USB socket cover marked
the left.
2
Insert the USB device into the USB socket.
The unit starts playing from the USB
»
device automatically.
Play from iPod/iPhone
1
Slide the USB socket cover marked
the left.
2
Inser t USB adaptor on one end of iPod/
iPhone cable to the USB socket on the main
unit.
3
Insert the other end of the iPod/iPhone
cable to the iPod/iPhone socket.
The unit starts playing from the USB
»
device automatically.
to select band: [FM1], [FM2],
or
to tune to a radio station
or
for over
.
again.
.
or
to
to
Installation guide
These instructions are for a typical installatio
However, if your car has different requireme
make the corresponding adjustment. If you h
any questions regarding installation kits, cons
your Philips car audio dealer.
Caution
This unit is designed for negative ground
•
(earth) 12 V DC operation only.
•
Always install this unit in the car dashboa
Other locations can be dangerous as the
rear of the unit heats up during use.
•
To avoid short-circuit: before you conne
ensure that the ignition is off.
Ensure that you connect the yellow and
•
power supply leads after all other leads a
connected.
Ensure that all loose leads are insulated
•
electrical tape.
Ensure that the leads do not get caught
•
under screws orin parts that will move (
seat rail).
Ensure that all ground (earth) leads are
•
to a common ground (earth) point.
Use only the supplied mounting hardwa
•
for a safe and secure installation.
Improper fuses can cause damage or fire
•
When you need to change the fuse, con
a professional.
Note on the power supply lead (yellow)
•
When you connect other devices t
apparatus, ensure that the rating of t
circuit is higher than the total fuse value
the connected devices.
Notes on speaker connection
•
Never connect speaker wires to the
body or chassis of the car.
•
Never connect speaker wires with stri
one another.