Table of Contents
Advertisement
CHAPTER TWELVE
BRAdmin Configuration
Assigning TCP/IP Information
Overview
The TCP/IP protocol requires that each device on the network have it's own unique
IP address. Use the following information to learn about IP address configuration.
By default Brother print servers have a sample IP address of 192.0.0.192, however,
you can easily change this IP address number to match with the IP address details of
your network. This can be done in any of the following ways:
1. Printer front panel setting (If your printer has an LCD front panel)
2. BRAdmin (for Windows 95/98/Me/NT 4.0/2000 using the IPX/SPX or
TCP/IP protocol)
3. DHCP, Reverse ARP (rarp) or BOOTP
4. The ARP command.
5. DEC NCP, NCL, or ccr utilities
6. Brother BRCONFIG NetWare utility (A Novell Network is necessary)
CHAPTER 12 TCP/IP CONFIGURATION
12
12-1
Advertisement
Table of Contents
Troubleshooting
