Download  Print this page

Patchwork (crazy Quilt) Stitching; Piecing - Brother CS-100T Operation Manual

Brother cs-100t sewing machines: users manual.
Hide thumbs

Advertisement

d
Carefully sew around the edge of the design.
e
Cut away any fabric that is left outside the stitching.
Remove the basting, if necessary.
f
Memo
● Make reinforcing straight stitches at the
beginning and the end of stitching.
CAUTION
● Be careful that the needle does not hit a pin
during sewing, as the needle can break. You
may also be injured.
Patchwork (crazy quilt)
stitching
Fold the edge of the top piece of fabric and
a
place it over the lower piece.
b
Sew the two pieces of fabric together so the
pattern spans both pieces.

Piecing

Sewing together two pieces of fabric is called
"piecing". The fabric pieces should be cut with a
6.5 mm (1/4 inch) seam allowance.
Sew a piecing straight stitch 6.5 mm (1/4 inch) from
either the right side or the left side of the presser foot.
a
Baste or pin along the seam allowance of the
fabric that you wish to piece together.
b
Attach zigzag foot "J".
Select stitch
or
c
Sew with the side of the presser foot aligned
d
with the edge of the fabric.
■ For a seam allowance on the right side
Align the right side of the presser foot with the
edge of the fabric, and sew using stitch
a 6.5 mm (1/4 inch)
■ For a seam allowance on the left side
Align the left side of the presser foot with the
edge of the fabric, and sew using stitch
1
a 6.5 mm (1/4 inch)
Memo
● To change the width of the seam allowance
(the needle position), adjust the stitch width.
For details, refer to "Changing the needle
position" (page 33).
.
.
1
.
43
3

Advertisement

Table of Contents

   Also See for Brother CS-100T

   Related Manuals for Brother CS-100T

Comments to this Manuals

Symbols: 0
Latest comments:
  • Virginia Maclauchlan Apr 09, 2019 03:21:
    Need manual for my CS-100 Brother sewing machine.
  • MacLauchan Apr 09, 2019 03:06:
    Need info for my Brother CS-100 portable sewing machine
  • Rosalina Nov 15, 2017 09:37:
    Como aser costura no camina para ningún lado que debo aser