Brother BE-0901E Software Manual

B
B
Creating Version Upgrade Disk
This document explains how to create the upgrade version disks using the upgrade file
or files which are downloaded from the website or sent by e-mail.
Downloading the file from website or email
1. Create a temporary directory on your computer (i.e., C:
extracting file or individual files on the hard disk.
2. Start downloading the file and or files.
3. Designate the directory created in step 1 above to save the downloaded file and or
files.
4. If you downloaded individual files you may skip this step. Double-click the self-
extracting file (*.exe) that you downloaded to extract it.
Creating the installation disk
When the file is extracted according to "Downloading the file" above, the following three
files are created.
# Of Disk
Files Label
1 SETUP DISK
INSTALL
2
DISK1
INSTALL
3
DISK2
(***varies according to the version of the software downloaded.)
1. Prepare three empty 1.4MB floppy disks.
2. Copy each file to a separate floppy disk.
3. Label each disk accordingly.
E S - 9 1 6 , 9
E S - 9 1 6 , 9
For Technical Assistance Please Call Toll Free 1-877-4BROTHER
File name
(BES-1216AC)
(BES-1201AC)
1201BS -***.bup
1201BM -***.bup
1201BP -***.bup
1
0 1 , 1 2 1 6 , 1
0 1 , 1 2 1 6 , 1
TEMP) to save a self-
\
File name
(BES-916AC)
(BES-901AC)
901BS -***.bup
901BM -***.bup
901BP -***.bup
2 0 1
2 0 1
File name
(BES-116AC)
(BES-101AC)
101BS -***.bup
101BM -***.bup
101BP -***.bup
Revised 1/10/05