Table of Contents
Advertisement
LOCATION OF CUSTOMER CONTROLS
FRONT VIEW
(1)
Disc Drawer
Accepts a CD-ROM/DVD-ROM disc on its tray.
(2)
Busy Indicator
The Busy Indicator lights during initialization and data-
read operations.
BACK VIEW
(1)
Digital Audio Output Connector
This connector is not supported.
(2)
Analog Audio Output Connector
The Audio Output Connector connects to a sound
card.
(3)
Master/Slave/CSEL Jumper
These three jumpers are used to set the DVD-ROM
Drive to either a Master, Slave, or CSEL device.
R O M
R O M
R O M
R O M
COMPACT
1
2
1
3
3
4
2
(3)
Emergency Eject Hole
Insert a paper clip here to eject the drawer manually or
when there is no power.
(4)
Open/Close/Stop Button
This button is pressed to open or close the CD tray.
If an audio CD is playing, pressing this button will stop
again will open the tray.
it, and pressing it
4
5
(4)
Interface Connector
This 40-pin connector is used to transfer data and
control signals between the DVD-ROM Drive and your
PC.
(5)
Power-in Connector
Attach a power cable from the computer to this
connector.
5
Advertisement
Table of Contents
