Installing The Brother Netbios Port Monitor - Brother HL-8050N Network User's Manual

NetBIOS Port Monitor for Windows
2000/XP and Windows NT
This software requires the TCP/IP transport protocols to be installed
on your Windows
computer. To install those protocols refer to your Windows
documentation.
If you are using the TCP/IP protocol, the proper IP address should
be defined on both the Brother print server and your client PC.

Installing the Brother NetBIOS Port Monitor

If you already installed the driver from the printers CD-ROM
Installer and you selected "Brother Peer-to-Peer Network
Printer" during the installation then you do not need to install
the Brother Network Print Software again.
1
Start the CD-ROM installation menu program according to the
Quick Setup guide.
2
Select the proper model and then the Software Installation
menu. Then select the Network Print Software menu to start
the Brother Network Print Software installation program.
3
Push the Next button in response to the Welcome message.
4
Select Brother Peer-to-Peer Print (NetBIOS) installation
5
Select the desired directory to install the Brother Network
Direct Print files and push Next.
6
Enter the port name that you wish to use. The port name must
start with "BNT". For example BNT1. Whichever name you
choose, it must be unique. Then press OK. The name must be
unique on your PC, however other computers can use the same
port name as the name you specify on your PC.
4 - 4 NETBIOS PEER TO PEER PRINTING
®
95/98/Me/2000/XP and Windows NT
®
95/98/Me/
®
4.0
®
4.0
®