Using Dhcp To Configure The Ip Address; Using Apipa To Configure The Ip Address - Brother HL-8050N Network User's Manual

Using DHCP to Configure the IP Address

The Dynamic Host Configuration Protocol (DHCP) is one of several
automated mechanisms for IP address allocation. If you have DHCP
Server in your network (typically a Unix/Linux, Windows NT
®
Windows 2000 or Novell NetWare network) the print server will
automatically obtains its IP address from DHCP server and register
its name with any RFC 1001 and 1002-compliant dynamic name
services.
If you do not want your print server configured via DHCP,
BOOTP or RARP, you must set the BOOT METHOD to static
so that the print server has a static IP address. This will
prevent the print server from trying to obtain an IP address
from any of these systems. To change the BOOT METHOD,
use the printer's control panel (for those printers that have a
LCD panel), TELNET (using the SET IP METHOD
command), a Web browser or by using the BRAdmin
application.

Using APIPA to Configure the IP Address

With Automatic Private IP Addressing (APIPA), DHCP clients
automatically configure an IP address and subnet mask when a
DHCP server is not available. The device chooses it's own IP
address in the range 169.254.1.0 through to 169.254.254.255. The
subnet mask is automatically set to 255.255.0.0 and the gateway
address is set to 0.0.0.0.
By default, the APIPA protocol is enabled.
10 - 5 TCP/IP CONFIGURATION
®
4.0,