Hitachi RD-190GX Instruction Manual page 8

Table of Contents

Advertisement

How to Operate
Fan Speed Setting
Continue to press the pad
to cycle through different modes.
The setting sequence and fan speed is:
High → Medium → Low → Quiet → High → ...
Timer Setting
Press the pad
auto off. The sequence is:
「1」→「2」→ ... →「12」→「None」→「1」
. Press the pad
Fan speed
setting is high
Fan speed
setting is medium
Fan speed
setting is low
Fan speed
setting is quiet
to set up the required time for
No timer is set.
Set the unit to turn
off automatically after
1 hour.
Set the unit to turn
off automatically after
12 hours.
Airflow Direction Setting
Press the pad
modes, fixed or automatic.
Changing the direction of louvers forcibly will cause
Note
damages to the louvers and motor.
Air Clean Mode
The unit will purify the air, generating fresher air. The
fan of the machine will operate and the compressor
is off. Air is filtered by the Anti-Dust Mite and
Electrostatic Nonwoven filter inside the unit. This
mode can be run together with other modes.
Pad Lock Setting
Press and hold the pad
(shown as the name plate) to lock / unlock the
control panel. Once the control panel is locked,
other pads will not work.
7
to cycle through two swing
When louvers swing to a
particular direction, select
"fixed", louvers will stop
moving.
Select "auto", louvers will
swing fore and backward.
The LCD graphic display will
also change based on the
wind directions.
for 3 seconds
Press and hold the pad
for 3 seconds to
lock the control panel
Press and hold the pad
for 3 seconds to
unlock the control panel

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rd-290gx

Table of Contents