Introduction; Overview - Brother HL-5250DN series Network User's Manual

Multi-protocol on-board ethernet print server
Hide thumbs Also See for HL-5250DN series:
Table of Contents

Advertisement

1

Introduction

Overview

1
The Brother print server allows your Brother printer to be shared on a 10/100Mb Ethernet Network and
®
®
®
provides printing services for Windows
95/98/Me, Windows NT
4.0, Windows
2000/XP supporting the
®
TCP/IP protocols and Macintosh
supporting TCP/IP.
To use the Brother printer through a network, you need to configure the print server, and set up the computers
you use.
In this chapter, you will learn the basic concept of the network connection and protocols, and in Chapter 2
you will read information on network configuration. Chapter 3 through Chapter 7 describes how to configure
your print server along with your operating system as follows:
Chapter 3: Network printing from Windows®: basic TCP/IP Peer-to-Peer printing
Chapter 4: Network printing from Windows®: NetBIOS Peer-to-Peer printing
Chapter 5: Internet printing for Windows®
Chapter 6: Network printing from Macintosh®
Chapter 7: Control panel setup
1 - 1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hl-5250dntHl-5270dn5250dn - b/w laser printerHl-5270dn series

Table of Contents