Other Information; Shipment Of The Printer - Brother HL-1430 Quick Setup Manual

Other Information

Shipment of the Printer

If for any reason you must ship your Printer, carefully package the Printer in the original packing
to avoid any damage during transit. It is strongly recommended that you save and use the
original packaging. The Printer should also be adequately insured with the carrier.
When shipping the Printer, the DRUM UNIT assembly and TONER CARTRIDGE must be
removed from the Printer and placed in the foil bag. Failure to remove the unit and place
it in the foil bag during shipping will cause severe damage to the Printer and may VOID
THE WARRANTY.
1
Turn off the printer power switch, and then
unplug the AC power cord.
2
Remove the drum unit assembly.
Place it in the foil bag and seal the bag
completely.
Trademarks
The Brother logo is a registered trademark of Brother Industries, Ltd.
®
Windows and Windows NT
Apple Macintosh, iMac, LaserWriter, and AppleTalk are trademarks of Apple Computer, Inc.
E S is a U.S. registered mark.
NERGY TAR
All other brand and product names mentioned in this User's Guide are registered
Compilation and Publication
Under the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the latest product
descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without notice.
Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be
responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited
to typographical and other errors relating to the publication.
This product is designed for use in a Professional Environment.
Options
19
®
are registered trademarks of Microsoft Corporation in the U.S and other countries.
3
Re-pack the printer.