Specifications - Brother HL-1230 User Manual

This printer can accept memory SIMM with the following

specifications:

Speed
Pin type
Height
Output
✏ Note
Additional memory is useful and may be necessary if you are using the Page
Protection function.
(For HL-1440 users)
The resident memory of HL-1440 printer is 2 MB, you need to expand the
printer memory by adding a SIMM to print at 1200 dpi.
(For HL-1470N users)
You have to expand the printer memory by adding a SIMM to use the FTP/IPP
protocol.
✏ Note
The printer has only one slot for a SIMM upgrade. If you want to increase your
printer memory again after you have already installed a SIMM module in the slot,
you will need to remove the previously installed SIMM.
60 nsec - 80 nsec
72 pin
25.4 mm (1.00") or less
32 bit or 36 bit
4-3
CHAPTER 4 OPTIONS