Position The Antenna On The Base Unit; Loading Paper - Brother MFC-845CW Quick Setup Manual

STEP1
Setting Up the Machine
6 Position the antenna on the
base unit
1
Move the antenna to the up position as shown
below.
Note
Avoid using in an area where it is difficult for radio
waves to penetrate such as in a reinforced
concrete building, near metal furniture or doors.
If you have purchased an optional cordless
handset, see Optionnal Cordless Handset in
the Digital Cordless Handset User's Guide.
7

Loading paper

You can load up to 100 sheets of 20 lb
(80 g/m
For details, see Acceptable paper and other
media in Chapter 2 of the User's Guide.
1
Pull the paper tray completely out of the
machine and lift the output paper tray cover (1).
6
2
) paper.
1
2
Press and slide the paper side guides (1) and
paper length guide (2) to fit the paper size.
3
Fan the stack of paper well to avoid paper jams
and misfeeds.
4
Gently put the paper into the paper tray print
side down and top edge first.
Check that the paper is flat in the tray.
1
2