Download  Print this page

For Wired Network Interface Users (for Windows ® 98/98se/me/2000 Professional/xp/xp Professional X64 Edition) - Brother MFC-665CW Quick Setup Manual

Brother mfc-665cw: quick setup.
Hide thumbs

Advertisement

Installing the Driver & Software
For Wired Network Interface Users
(For Windows
x64 Edition)
Important
Make sure that you have finished the
instructions from Step 1 Setting Up the
Machine on pages 4 through 15.
1
Unplug the machine from the AC outlet.
2
Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
3
Insert the network cable into the LAN socket
marked with a
LAN socket inside the machine on the left as
shown below.
4
Carefully route the network cable through the
trench and out the back of the machine.
Then, connect the cable to your network.
®
98/98SE/Me/2000 Professional/XP/XP Professional
symbol. You will find the
Improper Setup
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
Note
If both USB and LAN cables are being used, guide
both cables through the trench with one on top of
the other.
5
Lift the scanner cover to release the lock (
Gently push the scanner cover support
down (
) and close the scanner cover ( ).
6
Turn on the machine by connecting the power
cord.
®
Windows
).
21

Advertisement

Table of Contents

   Also See for Brother MFC-665CW

   Related Manuals for Brother MFC-665CW

   Related Content for Brother MFC-665CW

Comments to this Manuals

Symbols: 0
Latest comments: