Connecting An External Telephone Answering Device (Tad); Sequence - Brother MFC-3420C User Manual

Multifunction center/facsimile machine
Hide thumbs Also See for MFC-3420C:
Table of Contents

Advertisement

Connecting an external telephone answering
device (TAD)

Sequence

You may choose to connect an answering device. However, when
you have an external TAD on the same telephone line as the MFC,
the TAD answers all calls and the MFC "listens" for fax calling (CNG)
tones. If it hears them, the MFC takes over the call and receives the
fax. If it doesn't hear CNG tones, the MFC lets the TAD continue
playing your outgoing message so your caller can leave you a voice
message.
The TAD must answer within four rings (the recommended setting is
two rings). The MFC cannot hear CNG tones until the TAD has
answered the call, and with four rings there are only 8 to 10 seconds
of CNG tones left for the fax "handshake". Make sure you carefully
follow the instructions in this guide for recording your outgoing
message. We do not recommend using the toll saver feature on your
external answering machine if it exceeds five rings.
If you do not receive all your faxes, reduce the Ring Delay
setting on your external TAD.
If You Subscribe to your Telephone Company's Distinctive Ring
Service:
You may connect an external TAD to a separate wall jack only
if you subscribe to your telephone company's Distinctive Ring
service, have registered the distinctive ring pattern on your
MFC, and use that number as a fax number. The recommended
setting is at least four rings on the external TAD when you have
the telephone company's Distinctive Ring Service. You cannot
use the Toll Saver setting.
1 - 10 INTRODUCTION

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-3820cn

Table of Contents