Brother MFC-3360C Software User's Manual page 43

CAUTION
DO NOT unplug the power cord or remove a CompactFlash
MultiMediaCard™, SecureDigital™ or xD-Picture Card™ from the machine while it is reading the card (the
PhotoCapture key is flashing). You could lose your data or damage the card.
If you take out the media card while the PhotoCapture key is flashing, you must restart your PC at once
before putting the media card back in. If you put in another media card before the PC is restarted, the data
on it may be destroyed.
b
Load your document.
c
Press the (Scan) key.
d
Press a or b to choose Scan to Card.
Press OK.
Do one of the following:
To change the quality, go to e.
To start scanning without changing any settings, press Mono Start or Colour Start.
e
Press a or b to choose the quality you want.
Press OK.
Do one of the following:
To change the file type, go to f.
To start scanning without changing any settings, press Mono Start or Colour Start.
f
Press a or b to choose the file type you want.
Press OK.
Do one of the following:
To change the file name, go to g.
To start scanning without changing any settings, press Mono Start or Colour Start.
Note
• If you choose colour in the resolution setting, you cannot choose TIFF.
• If you choose monochrome in the resolution setting, you cannot choose JPEG.
g
The file name is set automatically. However, you can create a name of your choice using the dial pad.
You can only change the first 6 digits of the file name. (MFC models only)
Press OK.
Note
Press Stop/Exit or Clear/Back to delete the letters you entered.
h
Press Mono Start or Colour Start to start scanning.
® ®
, Memory Stick , Memory Stick Pro™,
Scanning
2
37