Status Led Indications - Brother DCP-8040 User Manual

Status LED indications

Status
The LED (Light Emitting Diode) will flash and change color
depending on the DCP status.
The LED indications shown in the table below are used in the
illustrations in this chapter.
LED
Green
Green
LED DCP status
Sleep Mode
Warming Up
Green
Ready
Green
Receiving Data
Yellow
Data Remaining in
Memory
Yellow
1 - 8 INTRODUCTION
Yellow Red
Yellow Red
Description
The power switch is off or the DCP is in Sleep
mode or Power save mode.
The DCP is warming up for printing.
The DCP is ready to print.
The DCP is either receiving data from the
computer, processing data in memory or
printing data.
Print data remains in the DCP memory.
LED status
LED is off.
LED is on.
LED is blinking.