Brother DCP-8040 User Manual page 117
Brother dcp-8040: users guide
Hide thumbs
Also See for DCP-8040:
- User manual (284 pages) ,
- Quick setup manual (54 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Advertisement
4
Plug the NC-9100h into connector P1 located on the main board
as shown in the illustration (press firmly) and secure the
NC-9100h with the two screws.
5
Put the metal shield plate back on and secure it with the two
screws.
6
Put the side cover back on.
7
Reconnect any additional interface cables that you removed.
8
Reconnect the power cable and then turn on the DCP power
switch.
9
Press the Test switch and print a network configuration page.
(See TEST SWITCH on page 8-10.)
8 - 8 OPTIONAL ACCESSORIES
Hide quick links:
Advertisement
Table of Contents
